Filter
Top Products
Installation Menu
39
The signal quality and the scan progress are indicated during the scan.
The message
appears at the end of the scan. All new channels are added to the existing channel
list.
The scan does not include analogue channels.
You can interrupt the search scan by pressing the L button.
TP setup/scan
In this menu you can scan through the
transponders for specific channels, e.g.
when new channels are offered in the
package of a specific broadcaster. You
can obtain this information from the
corresponding video text or TV and
satellite magazines. You can choose
between "analogue" and "digital".
Digital transponder
The following settings are possible in the
"digital" submenu (select positions with
ou):
•
• the symbol rate with number buttons and
• scan mode for freely receivable or free-to-air and unscrambled channels.
The bar diagram indicates the signal strength.
Start the scan by pressing O in the "scan" position.
You will now see the message:
If the scan is successful you will see the message
If the scan is unsuccessful
• Required satellite with
-
or
+
• the frequency of the transponder with
number buttons,
• the polarization with - or + button,
Scan completed
Press [OK] button
Scan active
Press L-button to cancel
Success
Error