Installation
54-0239 TracVision A5 Shop Manual © 2004 KVH Industries, Inc., All rights reserved.
• KVH’sHummerkitisdesignedonlyforstandard2"-thickHummer
roofrackcrossbars.
• Positiontheroofrackcrossbars39
1
/2"apart,measuredcenter-to-
center.
• Cuteachcrossbar’srubberstripintothreepiecesasshown
above.ThesemeasurementsarecriticaltopositiontheT-nuts
properly.
• Alwaysusethetamper-resistantTORXandpin-in-hexhardware
suppliedinthekitpack.Donotuseanysubstitutes.
Mounting to Hummer Rack
Effective April 2004
Subject to change without notice
Flat Washer
Pin-in-hex Screw
Crossbar
T- n u t
(in center channel)
Button-head
TORX Screws
T-nuts
19" Rubber Strips
26.25" Rubber Strip
Crossbar