KVH Industries TracVision Satellite TV System User Manual


  Open as PDF
of 32
 
Installation
54-0239 TracVision A5 Shop Manual © 2004 KVH Industries, Inc., All rights reserved.
Before you start:
• Beforeconnectingthepowercable,removethekeyfromthe
ignitionandremovethenegativeleadfromthevehiclebattery.
Connecting the receiver power cable’s red (positive) wire:
• Connecttheredwireto+12VDCswitched(accessory)power.
Withthevehiclerunningandthereceiverturnedon,poweratthe
receivermustmeasureatleast11VDC.
• Donotwireanyotherdevicetothesamepowercircuit.
Connecting the receiver power cable’s black (negative) wire:
• Connecttheblackwiretoitsowndedicatedchassisground(such
asapillargroundscrew)within18"ofthereceiver.
• Theblackwiremustmakecontactbetweenthemetalofthe
groundscrewandthemetalofthevehicleframe.
Connecting to Power
Effective April 2004
Subject to change without notice
VEHICLE POWER
(10-16 VDC)
VHF
ANTENNA IN
S-VIDEO
TO KVH
ANTENNA
TO VIDEO
SATELLITE IN
AUDI O R
AUDI O L
VIDEO
RF REMOTE
INPUT
OUT TO TV
COMPOSITE VIDEO
TO IRD
SATELLITE IN
DIAGNOSTIC PORT 1
DIAGNOSTIC PORT 2
Fuse
(6 Amp)
+12 VDC Switched Power
(Accessory Power)
Ground
Pillar Ground Screw
TracVision A5 Receiver
Supplied Cable
 previous next