Filter
Top Products
17
206-4207
(Continued from previous page)
3. (Optional) Run Auto Tuning.
Note: If you intend to use a USB memory device / .tlx file
for cloning purposes, DO NOT run Auto Tuning. If you
Teach a .tlx file with an auto-tuned/edited Channel Map
to a Target TV, this will put the Target TV in FTG Mode
via CPU. Proceed to step 6 to verify the TV setup. (Steps
4 and 5 are not applicable for .tlx les.)
If you run Auto Tuning with the intention to clone the resulting
Channel Map, you must use a USB memory device / .tll le or a
clone programmer for this cloning purpose.
a) To search for all available analog and digital channels, go to the
Channel Menu, select the Auto Tuning option, and follow the
on-screen instructions.
b) Use the Channel Edit option in the Channel Menu to edit the channel
lineup, as necessary, to include only free to guest (non-encrypted)
channels.
• Add/delete channels per your system requirements.
• Use the Channel Label option in the Channel Menu to select the appropriate trademark/
icon for each channel’s Channel-Time on-screen display. Icons are available for familiar
channels, such as ABC, CBS, NBC, etc. Identiable labels (icons) should enable the end
user to readily know what common networks are available.
Note: If you intend to clone the PTC and Installer Menu item 103 ATSC TUNE MODE is
set for Physical Channel tuning (default and recommended setting), channels with minor
channel numbers higher than 255 will not transfer correctly in step 4. If item 103 is set for
Virtual Channel tuning and either the major or minor channel numbers are higher than
255, the channel(s) will not transfer correctly in step 4.
Note: If you intend to clone the PTC, you can add the channel icons in this step or as
described in step 5. Also in step 5, you can add custom text labels for channels without
icons.
Custom Master TV Setup (Cont.)
CHANNEL
Enter
Move
Use Channel Menu options to
run Auto Tuning, edit channels,
and select channel icons.
• Auto Tuning
• Manual Tuning
• Channel Edit
• Channel Label
4. Transfer the TV setup menu settings to the commercial controller (PTC):
2-5-5 + MENU Mode
Note: This step is essential for successful cloning using a USB memory device /
.tll file or a clone programmer. Without this step, the PTC will not contain any of
the TV setup menu settings.
Note: The maximum number of channels (analog, digital, and Aux inputs) that can
be transferred to the PTC is 141. An attempt to transfer more than 141 channels of
any combination will result in a Channel Map of exactly 141 channels; any extra
channels will not be available in the PTC Channel Map. For example, if you en-
abled three Aux inputs in the Installer Menu and Auto Tuning found 141 channels,
you must edit the Channel Map to decrease the number of analog/digital channels
to (at most) 138.
(Continued on next page)