Filter
Top Products
63
206-4207
Reference: 26/32LQ630H Rear and Side Jack Panels
USB IN
AUDIO IN
(RGB/DVI)
AV IN
(AUDIO/VIDEO)
RGB IN (PC)
/DVI IN 1
IN 2
SPEAKER OUT
8
GAME CONTROL
/ MPI
PILLOW SPEAKER
TV-LINK
CFG
PTC SERVICE
(SERVICE ONLY)
CPU SERVICE
(SERVICE ONLY)
ANTENNA IN
..........
..........
RESET
UPDATE
HDMI/DVI IN
Connection for HDMI/DVI output
from external device.
AUDIO IN (RGB/DVI)
Audio connection for RGB or DVI
device.
RGB IN (PC)
Connection for RGB output from PC.
USB IN
Insert USB memory device for software
updates, cloning purposes, FTG Mode
via CPU configuration, picture/music
entertainment, etc., as applicable.
AUDIO/VIDEO IN
Connect to video/audio output port on
external device (use A/V adapter cable
provided with TV).
USB IN
AUDIO IN
(RGB/DVI)
AV IN
(AUDIO/VIDEO)
RGB IN (PC)
/DVI IN 1
IN 2
SPEAKER OUT
8
GAME CONTROL
/ MPI
PILLOW SPEAKER
TV-LINK
CFG
PTC SERVICE
(SERVICE ONLY)
CPU SERVICE
(SERVICE ONLY)
ANTENNA IN
..........
..........
RESET
UPDATE
PILLOW SPEAKER INPUT
Connect pillow speaker here.
SPEAKER OUT (8Ω) *
Connect to 8 ohm self-powered speaker input.
Intended for special applications, such as a
powered bathroom speaker with volume control.
* This stereo jack provides a mono speaker fixed-level,
1 watt output (audio +, audio -, w/ground shield). Do NOT
plug in a mono connector, as this may damage the TV.
GAME CONTROL/MPI
When the TV/EBL is in Pass-through Mode, the MPI
function enables an external MPI control device (i.e.,
clone programmer, VOD/PPV STB, etc.) to control the
TV. Game Control—EBL in LodgeNet PPV Mode only.
ANTENNA IN
Connect to
Antenna/CATV.
TV-LINK CFG
Use for direct PC-to-TV FTG
conguration.
CPU SERVICE (SERVICE ONLY)
Restricted to CPU service updates.
PTC SERVICE (SERVICE ONLY)
Restricted to PTC service updates.
USB IN
AUDIO IN
(RGB/DVI)
AV IN
(AUDIO/VIDEO)
RGB IN (PC)
/DVI IN 1
IN 2
SPEAKER OUT
8
GAME CONTROL
/ MPI
PILLOW SPEAKER
TV-LINK
CFG
PTC SERVICE
(SERVICE ONLY)
CPU SERVICE
(SERVICE ONLY)
ANTENNA IN
..........
..........
RESET
UPDATE
USB IN
Insert USB memory device for software
updates, cloning purposes, FTG Mode
via CPU configuration, picture/music
entertainment, etc., as applicable.
UPDATE
Restricted to software updates.
RESET
Initiates a hardware reset and
switches the TV to standby.