Filter
Top Products
29
206-4207
Channel Banks Setup (Cont.)
Typical Channel Preview/Banks Setup Menu
CHANNEL PREVIEW - BANK 1
CH 011-001 NORMAL-ADDED
Enter -> Change
CC -> VCHIP Menu, Ch. Preview -> Exit
IDs currently selected
channel bank.
IDs currently selected
channel.
IDs channel status in
selected bank.
Channel Status Options
• NORMAL-ADDED: Channel will
appear in channel lineup.
• NORMAL-DELETED
: Channel will not
appear in channel lineup.
• BLANK-ADDED: Channel will appear
in all channel banks; however, video
will be black, no picture.
• BLANK-DELETED: Channel will be
blanked in all channel banks.
Channel Status Options for Channel Banks
In the Channel Preview/Banks Setup Menu, use the Channel Up/Down arrows on the Installer Remote to
navigate to a channel and the Left/Right arrows to select the channel status.
Adding / Deleting / Blanking Channels
It is best to complete ADD / DELETE customization before assigning BLANK status. All channels found
during Auto Tuning are automatically assigned NORMAL-ADDED status in Channel Banks 1, 2, 3, and 4.
NORMAL-ADDED and NORMAL-DELETED status can be assigned independently for Channel Banks 1,
2, 3, and 4. However, a channel blanked, is blanked in all channel banks.
Note: Auto Tuning removes any channels previously customized with ADD / DELETE / BLANK.
Note: On individual TVs, if a channel was not found during Auto Tuning (and was not added during
Express Script/Custom Master TV Setup procedures), it can be added using the Manual Tuning option in
the Channel Menu.
Selecting Deleted Channels
To tune to a NORMAL-DELETED channel:
1. Select a channel bank where the channel’s status is NORMAL-ADDED.
2. Navigate to or direct enter the channel number.
3. Select the channel bank where the channel’s status is “NORMAL-DELETED,” and reconfigure the
channel status in the Channel Preview/Banks Setup Menu.
Inactive TV Setup
There are two options for creating an inactive TV display on Channel Bank 4. Either:
• Select NORMAL-DELETED for each channel in Channel Bank 4, or
• Press BANK on the Installer Remote until Channel Bank 4 is selected, and then press CH PREVIEW to
display the Channel Preview/Banks Setup Menu. Then, press the SAP key on the Installer Remote to
automatically delete all channels in Channel Bank 4.
When the TV is turned ON by the patient, an “Inactive TV Call Attendant” message will appear on the
screen, and after a few moments the TV will turn itself OFF. This will prompt the patient to arrange for an
available programming package on Channel Bank 1, 2, or 3. Using the Installer Remote, the administrator
can select Channel Bank 1, 2, or 3 depending on the entertainment programming tier selected by the
patient. When the patient leaves the hospital, the administrator can then select Channel Bank 4 to reinstate
the “Inactive TV” message.