32
206-4185
FTG Mode of Operation (Cont.)
Note: If the LD330H/LD333H TV is NOT already in FTG Mode, you may need to
perform some manual configuration on the TV before you start this procedure
(see “Optional Manual Conguration / Setup for a TV” on following page).
1. Plug a USB memory device into the USB IN port on the TV.
2. Press MENU to display the TV setup menus, use the arrow navigation keys to
select/highlight either the Option (if TV is in Pass-through Mode) or Lock (if TV
is already in FTG Mode) menu icon, and then press the number “7” key a total
of seven times to display the USB Download Menu.
3. To gain access to the Learn From TV options in the USB Download Menu, key
in the password used to enter the Installer Menu (Example: Press 9-8-7-6).
4. Use the Up/Down arrow keys to select Learn From TV (FMA), and then press
ENTER.
5. To identify the le from others, you can use the Up/Down arrow keys to
change the last ve digits of the lename. Press ENTER when you are ready
to initiate Learning.
The TV will show Learning completion progress in a new window. Do NOT
remove the USB device until Learning is complete. When Learning is complete,
the USB Download Menu will reappear on screen.
6. When you are nished, remove the USB memory device.
Learn From TV (FMA)
Select the le name and press OK to start
xx0BAL-PLAT200001.FMA
Return
Enter
►
►
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (FMA)
Learn From TV (TLL)
Learn From TV (FMA)
Return Enter
Learn From TV
UPDATING...
Do not unplug!
!
25%
Note: It is highly recommended that you open this FMA Configuration
file in the FTG Configuration Application—BEFORE transferring
(Teaching) the file to any TVs—to verify FTG Channel Map and FTG
Installer Menu settings and enable Pro:Idiom decryption by marking
Encrypted channels. This will also enable you to confirm and add
channel attributes, labels, etc.
Learning an FMA Conguration File from a TV
To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FMA Configuration file
using the FTG Configuration Application as described on page 30. However, if necessary, this option enables
you to save (Learn) an FMA Configuration file from an LD330H/LD333H TV to a USB memory device.