Filter
Top Products
23Installation
Installation
3
2. The [Connection Setting] menu appear on
the screen. Use
U
/
u
to select [Wireless] and
press ENTER ( ).
3. Select [Yes] and press ENTER ( ) to
continue. The new connection settings
reset the current network settings.
4. The player scans the all available access
points or wireless routers within range and
display them as a list. Use
U
/
u
to select an
access point or wireless router on the list,
and then press ENTER (
).
If you have security on your access point
or wireless router, verify that the WEP or
WPA key that was entered into the player
matches the router’s information exactly.
You need to input the security code as
necessary.
NOTE
WEP security mode generally have 4 keys
available on an access point or wireless router’
s setting. If your access point or wireless router
use WEP security, enter the security code of the
key “No.1” to connect on your home network.
An Access Point is a device that allows you to
connect to your home network wirelessly.
•
•
[Manual] – Your access point may not
be broadcasting its access point name
(SSID). Check your router settings through
your computer and either set your router
to broadcast SSID, or manually enter the
access point name (SSID) in [Manual].
[Push Button] – If your access point or
wireless router that supports the Push
Button Con guration method, select this
option and press the Push Button on your
access point or wireless router within 120
counts. You do not need to know the access
point name (SSID) and security code of your
access point or wireless router.
5. Use
U
/
u
/
I
/
i
to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
NOTE
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using
U
/
u
/
I
/
i
and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
6. Select [OK] and press ENTER ( ) to apply
network settings.
BD572-N-BUSALLK-ENG.indd 23BD572-N-BUSALLK-ENG.indd 23 2010.2.1 4:43:1 PM2010.2.1 4:43:1 PM