LG Electronics BD570 Blu-ray Player User Manual


 
53
Operation
Operation
4
NOTE
The  le requirements are described on page 10.
You can use various playback functions. Refer to
pages 34-41.
The thumbnail of the unplayable  les can be
displayed in the [Home Link] menu, but those
cannot be played on this player.
If there is an unplayable music  le in the [Home
Link] menu, the player skips the  le and play
next  le.
The subtitle  le name and movie  le name have
to be the same and located at the same folder.
The playback and operating quality of the
[Home Link] function may be a ected by your
home network condition.
The  les on an removable media such as USB
drive, DVD-drive etc. on your PC may not be
shared properly.
You may experience connection problems
depending on your PC’s environment.
PC requirements
Windows® XP (Service Pack 2 or higher),
Windows Vista® (no Service Pack required)
Windows 7® (no Service Pack required)
1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
Network environment: 100 Mb Ethernet,
WLAN (IEEE 802.11b/g/n)
NOTE
If you use Windows® XP or Windows Vista®, visit link
below for more information on  le share settings.
Entering a network user ID and the
password
Depending on your PC’s environment, you
may need to enter a network user ID and the
password for accessing a shared folder.
1. The keyboard menu appears automatically
if the network user ID and the password are
required.
2. Use
U
/
u
/
I
/
i
to select a character then
press ENTER (
) to con rm your selection
on the keyboard menu.
To enter a letter with an accent mark, select
the letter from extended character set.
Example: Select “D” and then press INFO/
DISPLAY ( ) to display the extended
character set. Use
I
/
i
to select “D” or “Ď”
and then press ENTER ( ).
[Clear] – Clear all entered characters.
[Space] – Inserts a space at the cursor
position.
[<–] – Deletes the previous character at the
cursor position.
[ABC / abc / #+-=&] – Change the keyboard
menu settings to capital letters, small letters
or symbols.
3. When you  nish entering the network user
ID and password, select [OK] using
U
/
u
/
I
/
i
and press ENTER (
) to access the folder.
The network user ID and password will
be remembered after accssing the folder
for your convenience. If you do not want
the network user ID and password to be
remembered, press red (R) colored button
to un-tick the [Remember] check box
before accessing the folder.
BD572-N-BUSALLK-ENG.indd 53BD572-N-BUSALLK-ENG.indd 53 2010.2.1 4:43:13 PM2010.2.1 4:43:13 PM