Filter
Top Products
EM-C061 Computer User Manual
8
2.2 MOUNTING
The EM-C061 is designed to be mounted in enclosures, rack-mounted, mounted in walls, and
integrated in systems. Other arrangements can be used as long as these standard criteria are met:
• When the unit is safely mounted the installation must be able to support at least five times the
unit’s weight. The unit must be rigidly fastened so that when the touch screen is used the unit
will not move or fall over. The weight of the unit is 26 lbs (11.82 kg).
• The mounting surface should not be a hot wall.
• The unit should be mounted for optimum visibility of the display. Typically, this is at or slightly
above eye level. Avoid looking down on AM TFT displays from directly above, as the viewing
angle is not as good as in other planes.
• Use the optional bezels or other transparent window to protect the display from impact.
Please refer to cut-out panel in Appendix A.
2.3 APPLYING POWER
Prior to applying power to the computer system the user should connect all peripheral equipment
including printers, Ethernet, external floppy drives, networks, etc. Refer to the section on I/O ports
for location information on peripheral connections. Once all associated equipment has been properly
connected, the user can make the power connection.
Once power is applied, the computer will run a series of system self tests. Upon completion of these
tests, the computer will open the operating system.