Filter
Top Products
EM-C061 Computer User Manual
2
1.2 INDUSTRIAL COMPUTERS
Deeco computers are designed for industrial conditions and exposure to harsh environments
including extended high and low temperatures, high and low humidity, and severe shock and
vibration. The optional sealed front bezel meets NEMA 4/12 (IP65) requirements.
Deeco computers are available with Deeco’s Power Assist factory automation software, which
speeds implementation of the EM-C061 in industrial control applications. Experienced Applications
Engineers are available to help customers integrate computers into special situations.
The EM-C061 is available with integrated 13.8" AM color TFT LCD with XGA resolution (1024 x
768) and up to 4K colors.
The systems are available with resistive touch system and touch mouse software. These allow the
operator to establish mouse control directly from the display by pointing and dragging a finger over
the display. Modified mouse drivers are loaded in the hard disk at the factory. These enable the
user’s finger to emulate a standard mouse. Available mouse drivers include MS-DOS/Windows™,
Windows 95, Windows NT, and OS/2.
1.3 SINGLE BOARD COMPUTER
The EM-C061 uses a Pentium-class 100% PC-AT compatible industrial single board computer
(SBC).
The SBC supports up to 64 MB of 72-pin SIMM DRAM, in increments of 4, 8, 16, 32 or 64 MB
configurations. The SBC comes with an integrated peripheral controller for floppy disks, up to 4
EIDE hard disks, two external serial ports (one if the touch option is ordered), and a bi-directional
parallel port. Also included is an on-board C&T 655xx 32-bit CRT/LCD controller.
All DOS-based software, Windows 3.1, Windows 95, Windows NT, Novell NetWare, UNIX, and
OS/2 are supported. Software can be ordered pre-installed.
Power-up self-test diagnostics, a programmable watchdog timer, and Green PC energy management
are standard features of the EM-C061.
Detailed information and specifications for the Single Board Computer are in the separate SBC
manual.