Filter
Top Products
EM-C061 Computer User Manual
29
9.0 Component Test Procedure
9.1 POWER SUPPLY
This section details the procedures for testing the functionality of the power supply.
Warning: The power supply produces DC voltages that can cause a severe electric shock if
handled improperly. Disconnect power before opening.
• Input Power:
Plug the computer into the desired power source. The voltage should fall within this range at the
power supply input connector.
Option 703, @ connector J1
Pin Power
1 Ground
2 - (Return)
3 +20 to +36 VDC
Option 704, @ connector J1
Pin Power
1 Ground
2 Neutral
3 100-240 VAC at 47-63 Hz
If the measured input voltage is not within the values shown, send the unit back to the factory for
power supply replacement/repair.