Filter
Top Products
14
15
Instead, a background image appears in which
the lms existing on the DVD are represented by
text. Only the lms themselves can be restored.
With the help of “DVD-Arabesk 2” you can
create a completely new menu.
Of course the original lms remain unchanged.
Warning: Only DVDs with a capacity of 4.7
GB can be read in. A greater capacity is not
supported.
To read in a DVD you require an empty DVD
hard disc section.
If you have not deleted all existing data, then a
message is issued after you have clicked on the
“Read DVD” button. If you conrm this message
with “Ok”, the data will be deleted automatically
after you have inserted the DVD.
A DVD that has been read in can be written any
number of times to a DVD-R or RW.
3.3 Miscellaneous: Erase DVD-RW
(8) You also have the option to erase a DVD-RW.
Click on the button “Erase DVD RW” and then
insert a written DVD-RW. When the drive closes,
the DVD is erased.
Note: With “DVD-Arabesk 2” you can write
both DVD-R and DVD-RW media. New drives
also support DVD+R media. (You can nd out
the installed drive and the supported formats
in the corresponding display in the window
“Settings”. Further information can be found
under item (9).) The DVD-R media can only
be written once and cannot be erased. The
advantage is that they work without problems
in most DVD players. DVD-RWs can be erased
and rewritten, but they are somewhat more
expensive and do not work with all players.
3.3 Miscellaneous: Settings
(9) A click on the button “Settings” opens a
window in which you can specify the “Write
Speed”. You have the possibility of specifying
two different speeds with the help of the
selection button, “Normal” and “High”.
For DVDs with small data volume the write
duration can be signicantly less than the actual
lm length, even for “Normal” speed.
The setting “High” causes the DVDs to be
written at a faster rate.
Whether or not high speed is supported
depends on several factors, e.g.
- Casablanca model
- Type of DVD drive
- media used (manufacturer, type)
- rmware
If high speed is to be used, then the DVDs must
always be high-speed media appropriated for
high-speed writing. Fast writing is not just a
factor of high-speed media, because the factors
listed above also play an important role.
Some DVD players may have a problem playing
high-speed media.
If high-speed writing is not possible, even
though it is set, the DVD will automatically be
written at normal speed.
Warning: Casablanca Avio does not support
high-speed writing.
In addition, in the window “Settings” you see
an information eld with details on your DVD
software, hardware, rmware and supported
media.
(10) With a click on the menu symbol in the
lower right corner of the “DVD-Arabesk 2” menu
you return to the “Finish” menu.
Note: When you exit the program “DVD-
Arabesk 2” you will nd yourself in the project
from which you started “DVD-Arabesk 2”.