Filter
Top Products
20
2. Timer Review
(Erasure & Correction)
2-1.Erasure
(1) Press the [SETUP] button to call the SETUP
menu in TV state or press the [PROGRAM]
button.
Press the [
/
] buttons to select the line of
“Record Timer” and press the [ENTER] button to
confi rm that.
(2) At that time, the VCR will check whether there
are some errors or not:
•
If the clock has not been set, then it will
change to “Clock Set” screen automatically.
•
If the PRs have not been set, then
it will change to “Installation” screen
automatically.
If there is no error, (2) screen appears.
Press the [
/
] buttons to select a erasing
timer program.
The [ENTER] button is pressed to confi rm that,
the stored contents of the selected Timer
program are displayed.
(3) The [CLEAR] button is pressed to erase.
2-2.Correction
(1) Press the [SETUP] button to call the SETUP
menu in TV state or press the [PROGRAM]
button.
Press the [
/
] buttons to select the line of
“Record Timer” and press the [ENTER] button to
confi rm that.
(2) At that time, the VCR will check whether there
are some errors or not:
•
If the clock has not been set, it will change
to “Clock Set” screen automatically.
•
If the PRs have not been set, it will change
to “Installation” screen automatically.
•
If there is no error, (2) screen appears.
Press the [
/
] buttons to select a correcting
record timer program.
The [ENTER] button is pressed to confi rm that,
the stored contents of selected Record Timer
program are displayed on the TV screen.
(3) The [
/
] buttons are pressed to correct
the record timer program, the OSD screen
will be changed to the screen of (3).
(4) How to correct: See the NEW
PROGRAMMING procedures. The next steps
are same as the steps of New Programming.
(5) To correct the other record timer programs,
repeat the procedure from the step (1) to
step (4).