Filter
Top Products
30
Special Playback/
Picture Search
1. Variable Slow
(1) During playback mode, press the [SLOW]
button once to see the slow picture.
Whenever the [SLOW] button is pressed in slow
mode, the slow speed will be changed:
1/15 -> 1/10 -> 1/5 -> 1/30 -> 1/25 -> 1/20 -> 1/15 -> .....
And the VCR goes to playback mode
automatically, if the slow mode exceeds 5 minutes
without any mode changes.
(2) Press the [PLAY] button to switch it back to
normal playback mode.
2. Pause / Still / Frame Advance
(1) During playback mode, press the [PAUSE]
button once to see the still picture.
Whenever the [PAUSE] button is pressed in still
mode, the picture will advance frame by frame.
The still mode is automatically changed to
playback mode when this mode is continued
for more than 5 minutes without any mode
changes.
(2) Press the [PAUSE] button to switch it back to
normal playback mode.
3. Two Step Picture Search
3-1.C
ue
(1) During playback mode, press the
[FFORWARD] button once, VCR will search
the picture forward: SP (x3), LP (x5).
(2) Press the [F/FORWARD] button again, the
tape will advance more rapidly. :
SP (x7), LP (x15)
The cue mode is automatically changed to
playback mode, when this mode is continued
for more than 5 minutes without any mode
changes.
(3) Press the [PLAY] button to switch it back to
normal playback mode.
3-2.review
(1) During playback mode, press the [REW]
button once, VCR will search the picture
backward: SP (x3), LP (x5).
(2) Press the [REW] button again, the tape will
advance more rapidly. : SP (x7), LP (x15)
The review mode is automatically changed to
playback mode, when this mode is continued for
more than 5 minutes without any mode changes.
(3) Press the [PLAY] button to switch it back to
normal playback mode.
Picture Adjustment
1. Tracking
1-1. Auto Tracking
(1) Under the following cases, the auto tracking
operation is performed automatically.
•
When a pre-recorded cassette tape is
inserted and is played back.
•
When the playback speed is changed
during continuous played back.
•
When signal is detected again after the
signal temporarily disappeared during
continuous
playback.
•
When the cassette tape, which has a
signal, is playedback fi rstly after power on.
•
When the cassette tape, which has a
signal, is playedback fi rstly after recording.
(2) During auto tracking, if press the [STOP]
button, the auto tracking operation will be
stopped.
However, if press the [PLAY] button again, the
auto tracking will be performed again.
1-2. Manual Tracking
(1) In playback mode, press the [1] or [3] buttons
to adjust tracking manually.
But, unfortunately, the optimal tracking position
can be recognized by TV screen only because
there is no display for this operation.