50
Symptom
Symptom
While recording and playing,
the top of screen extremely
waves.
A screen is not clear.
A screen at pause is trembling
or slow screen is not clear.
While duplicating, screen is
not clean and distorted.
Recording a TV program is
impossible.
Once pressing “REC”, a
videotape is ejected
automatically.
Timer recording of Cable TV
does not work.
In spite of pressing “CHANNEL”,
a channel can not be set.
While duplicating, screen is not
clean and distorted.
Checks
•
Since VCR Play signals are not stable like a TV signals,
screen may be unstable or curved while in playing. To fi x
the problem, please horizontal adjustment.
•
In case videotape is the one recorded by other products or
old one, stripe may appear on the screen.
•
Try to adjust the screen by [TRACKING +/-] button
•
Try to use a head-cleaner.
•
Try to adjust the screen by [TRACKING +/-] button.
•
Some tapes or discs distributed in the market for
lending is set to prevent copy in manufacturing.
These tapes cannot be duplicated in a good
condition.
•
For recording, you should use videotape with a tab.
•
Please check whether a channel is fi xed on video.
If not, you have to turn it into “TV” by pressing “CH” button.
•
Please check whether a channel is fi xed on video.
If not, you have to turn it into “TV” by pressing “CH” button.
•
Please check whether the timer recording info is right.
•
Are RF cables inputted antenna connection terminal
correctly?
•
Does a CH number selected in display section appear?
•
Please check a tab on a tape whether it is broken or
not. (If it was broken, please scotch-tape it)
•
Check whether a tape attached with a recording tap is
inserted.
•
Check whether the screen is displayed in VCR Only
Channel. Press [CH] button in this remote controller
to adjust in “General Broadcast” condition.
•
Is the rounded line (RF cable) connected in “ANT.
IN” terminal?
•
Is the selected channel number shown in Display?
•
Is a tab of cassette tape broken? (Please cover a tab hole
with cellophane adhesive tape (Scotch tape)
•
Please check whether the clock is right.
•
Does the display on your video show “f” (Ready to timer
recording)? Please make it out.
•
Please check whether the timer recording info is right.
•
Please check a tab on a tape whether it is broke or not. (If it
was broken, please scotch-tape it)
•
Was a cable data output code connected correctly?
•
Were a converter manufacturer setup and output channel
right?
•
Did you enter a password? (Please cancel it.)
•
Did you turn off your player? (Please turn it on.)
•
You may not memorize channels.
•
Please check your channel setting or press a number
button.
•
Some tapes or discs distributed in the market for lending is
set to prevent copy in manufacturing.
These tapes cannot be duplicated in a good condition.