Filter
Top Products
18
TURNING ON THE RECEIVER
You turn on the Plaza DS•100 receiver by
pressing the
button on the remote
control or the button on the front of the
receiver. The power light on the front of the
receiver changes from red to blue when the
receiver is on.
You turn the Plaza DS•100 receiver off, so it goes
into standby, by pressing the
button on the
remote control or the
button on the receiver.
When the receiver is in standby, the power light
on the front of it glows red. The Plaza DS•100
uses less power when it is in standby.
HINT: You should leave the Plaza DS•100
receiver plugged in, with the socket switched
on, at all times (except when there is lightning
– see appendix A). If you are not using the
receiver, put it in standby by pressing the
button on the remote control or the
button on the front of the receiver.
CHANGING CHANNELS
Flick through channels by pressing the
and
buttons on the remote control (or the
CH
–
and
CH
+
buttons behind the fold-down
ap
on the front of the Plaza DS•100 receiver).
Pressing
the
or
CH
+
button will select
the
next
channel in the channel list. Pressing
the
or
CH
–
button will select the previous channel in
the list. When you have chosen the
last channel
in the list, pressing the
or
CH
+
button will
select the rst channel in the list. Similarly,
when you are on the rst channel, pressing the
3
This section describes the day-to-day
use of your Plaza DS•100 receiver –
how to choose the channel you want
to watch and how to control the basic
features of your Plaza DS•100 receiver.
EVERYDAY USE