Marantz DV7600 DVD Player User Manual


 
Playing Discs
5
28
Playing JPEG
1When a JPEG disc is loaded, directories will
be shown on the screen.
PLAY MODE : Folder
0640 1
0641 2
0642 3
0643 4
0644 5
0645 6
ROOT
0
FOLDER2
FOLDER3
FOLDER4
FOLDER5
FOLDER1
2 Select a directory by pressing the cursor
buttons (5//2
/
3) and press the 3
(PLAY) button or ENTER button.
3File names will appear on the screen. Select
the desired file by pressing the 5/ or
number buttons of the remote control and
press the 3 (PLAY) button. Slide show will
start from the selected file.
Note
Some files on the JPEG disc may be distorted
during playback due to the configuration or
characteristics of the disc.
Please refer to “Caution” on page 9.
1) How to pause the display
Press 8 (PAUSE) button. To start playback,
press 3 (PLAY) button.
2) How to cue a still image to be displayed
Press the SKIP (¢ (NEXT)) button to
proceed to the next still image and press the
SKIP (4 (PREV.)) button to return to the
previous still image.
3)Changing the orientation of a still image
•Press the cursor button (3) to rotate the image
clockwise 90 degrees.
•Press the cursor button (2) to rotate the image
counter-clockwise 90 degrees.
•Press the cursor buttons (5) to flip the image
from top to bottom by 180 degrees.
•Press the cursor button () to flip the image
from right to left by 180 degrees.
4) Zoom playback
To zoom, press the ZOOM button during
playback.
Each time the
¡
(FF) button, the magnifica-
tion level changes.
Each time the
1
(REV) button, the reduction
level changes.
Note
The picture is rendered in Still mode while
zooming.
Zoom play cannot be used on some discs.
Zoom will not operate properly for some
scenes.
The Setup Key does not operate during
thumbnail display.
Video Adjust
You can set the picture settings you desire and
store them in the player’s memory.
Selecting a preset
1Press the VIDEO ADJ. button on the re-
mote control.
2 Select “Memory Select”.
3Use the cursor buttons (2
/
3) to select a
preset, and press ENTER button.
Memory Select Standard
Setup
Video Adjustment
Standard – optimized settings for a standard
television set
Memory 1, 2, 3 – User presets (see below for
more on these)
You can highlight a preset while a disc is playing
(before you press ENTER to select it) to see the
effect on the picture immediately.
Note
Depending on the disc and your TV/monitor,
the effect of these settings may not be clear.