Filter
Top Products
6DVD Setup Menu
39
English
Setting up the Audio Setup
VIDEO
Bitstream
MPEG Out PCM
On
Move : Select : Enter
HDMI DISC SYSTEM
SPEAKER
AUDIO
SP LEVEL
Digital out
PCM Down Sample
2 Channel (Stereo)
Audio Out
Audio DRC Off
* You only need to make Digital Out, MPEG Out and
PCM Down Sample setting if you connected this
system to another component (AV amplifier, etc.)
using one of the digital outputs.
* When HDMI is connected and the HDMI menu
Audio setting is Auto or PCM, the Digital Out and
MPEG Out settings are as per the HDMI menu
Audio setting, and PCM Down Sample is always on.
Digital Out*
• Default setting: Bitstream
If your AV amplifier (or other connected compo-
nent) is Dolby Digital compatible, and has a built
in DTS decorder set to Bitstream, otherwise set to
PCM. Check the manual that came with the other
component if you’re unsure whether it is Dolby
Digital and DTS compatible.
If at any time you need to switch off the digital
audio output, set this to Off. Note that you can’t
switch on/off the optical and coaxial outputs
individually.
Note
• Super Audio CD will not output digital sound.
• If you set to Bitstream with a non-DTS compat-
ible amplifier, noise will be output when you play
a DTS disc.
•Set to Bitstream for Dolby Digital and DTS 5.1
channel analog output.
•Set to Off for DVD Audio 192/176.4/96/88.2
kHz Hi Sampling and 5.1 channel analog
output.
MPEG Out*
• Default setting: PCM
If your AV amplifier (or other connected compo-
nent) is compatible with MPEG audio, set this to
Bitstream, otherwise set it to PCM (MPEG audio
is converted to more compatible PCM audio).
Check the manual that came with the other
component if you’re unsure whether it is MPEG
audio compatible.