Marantz MV8300 VCR User Manual


 
EN 37
1
Access Main Menu screen
Press MENU.
2
Access Guide Channel Set screen
1 Press
@ #
move
the arrow to
“INITIAL SET
UP”, then press
or OK.
2 Press
@ #
to move
the arrow to
“GUIDE
CHANNEL”, then press or OK.
3
Input guide channel number
Press
@
#
to input the
VCR Plus+ guide
channel number as
shown in the TV
listing.
If you receive your
channels with a
cable box and if
you have properly
set your Controller,
“CABLE CH” appears in place of “VCR CH”. If
not, refer to pages 15 – 17 and re-perform the
procedure.
In that case, it is possible to change the channel
by 10 channels by pressing and holding
@ #
in
steps 3 and 4.
4
Input receiving channel number
Press %fi to move
the arrow to “VCR
CH”, then press
@
#
to input the number
of the channel on
which the guide
channel’s broadcasts
are received.
Repeat steps 3 and
4 for each
instance.
5
Return to normal screen
Press MENU.
FUNCTION SET UP
INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
CLOCK SET
GUIDE CH
6
VCR CH
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
(Ex.) When inputting the
guide channel number 6
for WNJU(Ind.)
FUNCTION SET UP
INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
CLOCK SET
GUIDE CH
6
VCR CH
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
(Ex.) If WNJU(Ind.) is
received on channel 47
FUNCTION SET UP
INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
CLOCK SET
GUIDE CH
6
VCR CH
47
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
MV8300_U1B-EN34-41 4/1/3, 2:35 PM37