Filter
Top Products
60 EN
OTHER USEFUL FUNCTIONS (cont.)
i.LINK Set Up
i.LINK set up for connected device
When you connect i.LINK compatible devices to this
VCR, an i.LINK device number is assigned to each
device in the order of connection.
If you want to change the number, follow the procedure
below.
1
Access Main Menu screen
Press MENU.
2
Access i.LINK Set Up screen
1 Press
@ #
to move the arrow to “INITIAL SET
UP”, then press fi or OK.
2 Press
@ #
to move the arrow to “OTHER”,
then press fi or OK.
3
Confirm LINC setting
Check that “LINC” is
set to “AUTO”. If not,
press %fi to move
the arrow to “LINC”,
then press
@
#
to set
to “AUTO”.
4
Reset Number
Press %fi to move
the arrow to “RESET
NUMBER”, then
press OK.
5
Return to normal screen
Press MENU.
6
Set Number again
Connect the external devices one by one.
• Make sure to connect the VCR's AC power plug
to the AC outlet and turn on the external device
before connection.
• Each device will be numbered in the order of
connection.
NOTES:
●
If you do not want to set i.LINK device number, set “LINC” to
“OFF” in step
3
.
●
You cannot use the i.LINK connection depending on the types
of camcorder equipped with the DV connector. In this case,
set “LINC” to “OFF” in step
3
.
VCR
TV
CABLE
/DBS
2 - 4
1 5
FUNCTION SET UP
INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
CLOCK SET
JLIP ID
LINC
RESET NUMBER
1
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
AUTO
SELECT
OK
EXIT
MENU
FUNCTION SET UP
INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
CLOCK SET
JLIP ID
LINC
RESET NUMBER
1
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
AUTO
SELECT
OK
EXIT
MENU
● Turn on the VCR and the TV, and select the AV
mode on the TV.
● Set the VCR/TV/CABLE/DBS selector on the
Remote to “VCR”.
ATTENTION
If the i.LINK setting does not work, press D-VHS and
STOP/EJECT ( 7/0 ) simultaneously for more than 5
seconds to reset the settings. The cassette is automatically
ejected.
LINC
You can control one of the i.LINK-compatible devices
connected to this VCR with the i.LINK cable. “LINC”
means to select one of the connected devices. After
establishing a LINC with an i.LINK-compatible device,
you're ready to control the i.LINK device.
LINC (Logical Interface Connection) involves establishing a
logical connection, as the abbreviation implies.
MV8300_U1B-EN53-63 4/1/3, 2:33 PM60