ENGLISH
MEMO
CLEAR
GUIDE
MUTE
CH
VOL
OK
CD
DVD
CD-R/MD
DSS
TV
VCR
AMP
LD
TUNER
TAPE
AUX
AUTO
DOLBY THX
DTS
HALL
CD
CLEAR
OK
w
q
ON
OFF
ON /OFF
SOURCE
MACRO
MODE
LEARNING REMOTE
CONTROL RC
1200
POWER
2. Erasing by Button(s)
To clear the codes and names
programmed in any of the buttons
• Press the button concerned twice while
holding down the CLEAR button ⁄5.
When the codes are cleared, the
button returns to its factory presets or
it is left empty.
Jog Dial codes can be cleared in the
same way: turn the Jog Dial to call up
the name of the command whose
codes are to be erased, and press the
ENT button n (either the left one or
the right one) twice while holding
down the CLEAR button ⁄5, and the
codes and command names
memorized in the button will be
cleared.
When the codes are cleared, the
button returns to its factory presets or
it is left empty.
• To erase codes programmed for the
CLEAR button ⁄5, simply press the
CLEAR button ⁄5 continuously for 3
seconds.
As an example, let’s clear the PLAY
command from the laser disc player
command set.
1. While holding down the CLEAR button ⁄5:
2. Press the OK Cursor button ⁄0 twice.
