Marantz RC1200 Universal Remote User Manual


 
ENGLISH
JOG DIAL COMMAND
FUNCTIONS LISTING
Each of the 10 Jog Dial commands on the LCD
has 5 character labels attached for pre-
programmed remote commands. These
commands can be used with various Marantz
A/V components, or other components using
the Philips RC-5 remote control language
(without DSS function).
You can easily replace the factory-supplied
remote command codes with different codes
from other brands of component. Most of the
supplied functions apply to a wide variety of
component from many companies. The
following list shows the remote code
assignments for the Jog Dial commands, for
each of the 11 Function buttons, as supplied
from the factory. You can add or replace Jog
Dial commands, including re-naming them if
you wish, in order to customize the remote
controller for your own particular selection of
A/V components.
Function Command Note
AMP 1 MODE selects surround mode
2 A/D switches analog/digital
input
3 ATT switches attenuator for
analog input
4 NIGHT selects NIGHT mode
for Dolby Digital
5 MULTI activates multi-room
mode
6 6-DIR activates 6-channel in-
put
7 TRB+ increases treble
8 TRB- decreases treble
9 BAS+ increases bass
0 BAS- decreases bass
TUNER 1 FM FM band
2 AM AM/MW band
3 LW Long Wave band
4 T-MOD mono/stereo/muting
mode selector
5 SCAN programmed preset
channel scan
6 STM selects station mode
7 AF selects AF function
8 PTY selects PTY function
9 DISP selects display func-
tion
0 DWR selects DSR wave
range