Filter
Top Products
ENGLISH
ON
OFF
ON / OFF
SOURCE
MACRO
MODE
LEARNING REMOTE
CONTROL RC
1200
POWER
MEMO
CLEAR
GUIDE
MUTE
1
2
3
4
5
AMP
LD
TUNER
TAPE
AUTO
DOLBY THX
DTS
HALL
MEMO
COPY MODE
In the copy mode, the preset codes or
programmed codes stored in the buttons can be
transferred (copied) to other keys as desired.
The information that will be copied includes
not only codes but also names which have
been assigned. Information can be copied on
a button by button basis, and Jog Dial codes
can be copied.
Buttons which are excluded from the copying
process are the MODE button z, MACRO button
x, < • 3 button ⁄1 and function buttons ,.
COPYING ON A BUTTON BY BUTTON
BASIS
As an example, the information stored in 1 ⁄7
on the ten-key pad for the LD function will be
copied here to 1 ⁄7 on the ten-key pad for the
DVD function.
1. Use a ballpoint pen or other sharp point to
press the operation MODE button z to
call up the LEARN display. LEARN now
blinks on the LCD display.
2. Press the MEMO button ⁄6 for 3 seconds.
(The learn mode of the MEMO button is
established first, and after 3 seconds it
changes to the COPY mode.)
"CPY→" appears at LCD A.