Filter
Top Products
ENGLISH
The Setup mode includes the following
items, which may be accessed using the
^ and v Cursor buttons ⁄0.
• Switch destination (version) (VER)
• Adjust time interval between
transmissions of macro operations
(MACRO)
• LCD lighting duration adjustment
(LIGHT)
VER: Switches the type of preset codes
contained in the remote controller .
LCD A displays VER, while LCD B displays
either USA or REST. USA means that the CD-
R/MD Function button , is set to CD-R.
REST means that the CD-R/MD Function
button , is set to MD.
Use the < and > Cursor buttons ⁄0 to select the
desired version, then press the OK Cursor
button ⁄0. This will finish the operation and
return the LCD to its original state.
• To cancel the setting, press any button
other than the Cursor buttons ⁄0.
• To continue the setting, press the v Cursor
button ⁄0.
Note:
Codes that have been programmed will not
be erased even if the VER setting is
changed, however the NAME indicator
displays associated with the Jog Dial
command will be changed. Also, the Jog
Dial commands for CD-R/MD functions that
are contained within macros will also
change.