Filter
Top Products
ENGLISH
A
B
I
J
D
H
G
C
E
F
LCD (Liquid Crystal Display)
Information about currently selected functions
and modes is displayed on the LCD. Pressing
any buttons will call up a full display of
information on the status of that function or
mode. This display will disappear after
approximately 1 minute, except for the
Function Name indicator A, which is always
displayed.
A Function Name indicator
Displays the name of the currently selected
function (LD, TV, etc.) using up to 5 characters.
B Command Name
indicator
Displays up to 10 types of commands for each
function using up to 5 characters.
C Command Page indicator
Allows confirmation of current command page
of Jog Dial m . Also, when setting or
transmitting macros, displays information such
as the number of macro steps and the time
intervals between command transmissions.
D Transmission indicator
Indicates when the remote controller is
transmitting a signal.
E USE indicator
Indicates the status in which the programmed
code is output.For normal operation the USE
indicator is displayed.
F LEARN indicator
Indicates when the remote controller is in the
LEARN mode. It also appears when
programming is cleared.