TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications
ENGLISH
1. Home Theater Playback – Playing Back Using Multi-channel System –
Connection to an AV Amp with No HDMI Video Input
7*%&0
7*%&0*/
47*%&0*/
:
1#
13
$0.10/&/5
7*%&0*/
AV Amp
Check the video terminals and make the connection to one of them.
When connecting using the component video outputs, press
and set it to “HDMI Off”.
•
•
2. Playing Back with a Direct Connection to a TV
Check the television’s audio and video terminals and make the connection to one of them.
"6%*0
"6%*0
*/
-3
7*%&0
*/
7*%&0
7*%&0
*/
47*%&0
7*%&0
$0.10/&/57*%&0
: 1# 13
*/
*/
)%.*
R
L
R
L
TV
Audio terminals Video terminal S-Video input
terminal
Component video
input terminal
HDMI input
terminal
TV TV TV TV
(Sold
separately)
(supplied)(supplied)
(Sold
separately)
(Sold
separately)
NOTE
Do not connect the UD8004’s video output via a VCR (Video Cassette Recorder). Some media contain
copy prohibit signals, which will disturb the screen image.
When playing NTSC disc, UD8004’s video output becomes NTSC signal format.
When playing PAL disc, UD8004’s video output becomes PAL signal format.
When connected to the television’s component video input terminal
The UD8004’s component video output supports 480i/576i/480p/576p/720p/1080i output. Match the
output to the corresponding resolution of the connected television by setting, on the GUI menu: “Video
Setup” – “Component Resolution” (vpage 24). Images will not be projected normally if the television
resolution and UD8004’s output resolution do not match. Copyright protected DVD is output in 480i/576i
or 480p/576p.
n
•
NOTE
When you press and set it to “HDMI On”, no video signals are output from the component video
terminals. When using the component video terminals, set HDMI mode to “HDMI Off”.
When connected to the HDMI input terminal
Outputting both digital video and digital audio signals.
See “Required Settings for HDMI Connection” (vpage 13) for HDMI video output and audio output
settings.
n
Connections