Filter
Top Products
TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started Specications
ENGLISH
3. Playing Back 2-Channel Audio
Connecting to a Device with Analog 2-channel Audio Input
Terminal with Stereo Pin Plug Cable
"6%*0
"6%*0
*/
-
3
R
L
R
L
R
L
R
L
Stereo
For software recorded in multi-channel, analog signals that have been down-mixed into 2 channels
are output.
"6%*0
"6%*0
*/
-
3
R
L
R
L
Stereo
For software recorded in multi-channel, analog signals that have been down-mixed into 2 channels
are output.
When connecting using the analog 2-channel audio output terminals
When connecting using the analog 7.1-channel audio output terminals
On the GUI menu, select “Audio Setup” – “7.1ch Audio Out”, and set it to “2 channel” (vpage 25).
Connecting to a Digital Recording Device
"6%*0
$0"9*"-
*/
*/
015*$"-
MD Recorder
When converting multi-channel audio to 2-channel for output, on the GUI menu, select “Audio Setup”
– “Digital Out”, and set it to “PCM Down Sampling” (vpage 27). If you play back DVD or other media
with incorrect conguration, deafening noise occurs that may damage the speaker.
4. Recording a CD
Connections