Filter
Top Products
TroubleshootingInformationHDMI Control FunctionPlaybackConnectionsGetting Started Speci cations
2
ENGLISH
Setting items
Setting contents
7.1ch Audio Out
GSurr. BackH : Set the presence, size and number of surround back
speakers.
Size : Set the surround back speaker size.
Large : Use of a large speaker that can adequately play back low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity
for low frequencies.
None : Select when the surround back speakers are not connected.
Number : Set the number of surround back speakers.
1 spkr : Use only one surround back speaker. Surround back audio is
output from the surround back L terminal.
2 spkrs : Use two surround back speakers.
GCrossover Freq.H : Set the upper limit of the low frequency signals
output from the subwoofer.
40Hz/60Hz/80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz
: Outputs at below set frequency, each speaker’s bass signal
output from the subwoofer. Set this according to the low frequency
reproduction capabilities of the speakers you are using.
Advanced : Set the low frequency signals to be output from the
signals of the respective speakers to the subwoofer.
Front, Center, Surround, Surr. Back
40Hz/60Hz/80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz
LFE / LFE+Main
80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz
When, on the GUI menu, “Audio Setup” – “7.1ch Audio Out”– “Multi
Channel” – “Speaker Con guration” – “Subwoofer” is set to “Yes”
(vpage 25), you can select “LFE” or “LFE+Main”.
•
•
•
•
Setting items
Setting contents
7.1ch Audio Out
Makes the audio setting for
output of analog 7.1-channel
audio to a multi-channel
ampli er.
To set “7.1ch Audio Out”,
set “HDMI Setup” – “Audio
Setup” on the GUI menu to
“2Ch” or “Mute” (vpage
24).
NOTE
You cannot select “None”
or “No” for “HDMI Setup”
– Audio Setup” – “Multi
LPCM BM On” – “Speaker
Con guration” (vpage 23,
24) on the GUI menu.
Multi Channel
Set the speaker con guration, channel level and distance for multi-
channel playback.
2 Channel
Outputs multi-channel downmixed audio from the front speaker output
terminals (FL/FR) of the 7.1-channel audio output terminals. Make this
setting when outputting to a TV and 2-channel ampli er.
NOTE
The 7.1-channel audio output terminals output only FL/FR when you
make this setting.
n Speaker Con guration : Set the speaker con guration.
GFrontH : Set the front speaker size.
Large : Use of a large speaker that can adequately play back low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity
for low frequencies.
GCenterH : Set the presence and size of the center speaker.
Large : Use of a large speaker that can adequately play back low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity
for low frequencies.
None : Select when a center speaker is not connected.
GSubwooferH : Set the presence of a subwoofer.
Yes : Use a subwoofer.
No : Select when a subwooofer is not connected.
GSurroundH : Set the presence and size of the Surround speakers.
Large : Use of a large speaker that can adequately play back low
frequencies.
Small : Use of a small speaker that has inadequate playback capacity
for low frequencies.
None : Select when the surround speakers are not connected.
•
•
•
•
•
•
•
•
•
•
Set the speaker or audio to be output.
Setting related to each channel setting and other audio in the case of outputting analog
audio signals decoded by the UD8004.
Audio Setup
Default settings are underlined.
Remote control operation
buttons
:
Displaying the menu
Cancel the menu
:
Moves the cursor
(Up/Down/Left/Right)
:Decision the setting :Return to previous menu
Setup
See overleaf