Filter
Top Products
42
CD OPERATION (CONTINUED)
PROGRAMMED PLAYBACK
The player in this unit has a 15 track programmable memory that allows you to program up to 15 tracks on any disc for
playback in any desired order. You may program 15 different tracks or you may also program certain tracks to play more than
once. To perform Programmed Playback, proceed as follows:
During playback of a CD disc, press the PROGRAM/Red
button; the Program menu will appear on the TV screen.
1
Press the ENTER button 1. Select the first track using the
Number (0-9) buttons 2 or the Navigation (π,†) buttons 3.
Press the ENTER button 1 to go to the next program.
NOTES:
• To clear and input a track again, select the track then
press the CLEAR 4 button.
• To redo a program number, select it using the Navigation
(π,†) buttons 3. Press the ENTER button 1 and reset.
1
2
4
3
3
2
Repeat step 2 until all desired tracks have been
programmed (up to 15). Press the Play ® button to start the
program playback. Playback will begin on the first track that
you programmed and the player will continue to play all of
the tracks that you programmed in the order in which you
programmed them. After all programmed tracks have been
played, the unit will stop automatically.
3
OSC SETUP:
During playback, press the OSC button; the OSC menu will
appear. You can set the following in this menu:
Track: Select a desired file to play.
Time: Select and then repeatedly press the Navigation (†)
button to cycle between the disc’s elapsed playing time, the
disc’s remaining playing time, the track’s elapsed playing
time, and the track’s remaining playing time.
Play Mode: Select between Random or Normal.
Bitrate: Select to view the disc’s audio bitrate.
Instant Search: Press to start fast forward search in order
to locate a particular section. Press the Play button to
resume the normal playback.
Instant Replay: Press to rewind the unit approximately
10 seconds.
Press the OSC button again to return.