Metz None Flat Panel Television User Manual


 
44
Adjusting the picture format:
• Press the F3 key.
If you press F3 briefly, the function programmed
for F3 (see Section 18., "Programming the Func-
tion keys") is executed.
If you hold down F3 for about two
seconds, all possible selections are dis-
played.
• Press numeric key
³ to select the
function "Picture format menu".
• Use the "P+/P-" rocker key to select the
desired function. After selection of a
picture format, you can also adjust the
zoom setting by pressing the
-
+
key
within five seconds.
• The settings made here (except for the
automatic zoom set in the TV menu)
remain active until you switch to a diffe-
rent programme position or switch off
the TV set.
Zoom / Picture position
After selecting the function "Zoom", you
can adjust the zoom factor with the
-
+
key. In addition, you can move the picture
position
4)
up and down on the screen in
order, for example, to keep the station
logo or the subtitles visible. To change the
picture position, press and hold the F3 key
until the selection is displayed. Then press
numeric key
and use the "P+/P-"
rocker key to move the picture.
Standard 4:3
This is the standard setting for all programmes in
the 4:3 picture format.
17. Special Functions
Picture format
Opening the menu
F3
Special functions 3
1 Picture format
2 Pic. form., vertikal
16:9 full picture
+
Zoom
Standard 4:3
606 47 2030.A1 ML GB 16.04.2007 12:34 Uhr Seite 44