Filter
Top Products
26 3. Using TV Features
In Canada call 1(800) 450-6487 for assistance.
ChannelView Channel Listings
ChannelView displays program descriptions sent by
broadcasters. This information may be unavailable
in some areas.
ChannelView. Programs for the tuned channel are
listed on right side of screen.
ChannelView™ shows memorized channels on the
ANT
input. It displays channel names and program infor-
mation for digital channels as sent by broadcasters or
your local cable service provider (information may be
unavailable in some areas)
.
No program information is
displayed for analog channels.
Note: You must set the TV Clock (page 43)
t
o receive
ChannelView listings for the current channel.
Using ChannelView
Feature Instructions
Display/hide ChannelView
listings from the ANT
input.
GUIDE
Receive updates for a
digital channel.
Press 1. to
highlight a channel
number.
Press the 2.
INFO
key
(the screen may
briefly go blank).
Scan channels one by one.
Hold or
Scan channels quickly.
Hold
PAGE UP/PAGE DN
Jump to listings for a spe-
cific channel.
Enter the channel 1.
number.
Press 2.
ENTER
.
See more of the program
description for the current
channel (if available).
INFO
Tune to the highlighted
channel.
ENTER
Redirecting Audio Output
Selecting an Audio Output Device
Press
1.
MORE
and then
9
(AUDIO)
.
Press
2.
to show the Speakers option. The
Speakers option will display only if there is a rec-
ognized audio device on an audio output or HDMI
input.
Press
3.
to select either AV Receiver, Head-
phones, or TV.
Note: The Headphones option displays only if you
selected the name Headphones in the New
Device Found screen.
Disconnecting an Analog A/V Receiver
When you disconnect an analog A/V receiver, change
the Speakers setting to TV to hear sound from the TV
speakers. Change the setting using the remote con-
trol’s
MORE
>
9
(AUDIO
)key or the Adjust > Audio >
Speakers menu.
Controlling A/V Receiver Sound
Volume
Use one of the methods below to control sound volume from
an A/V receiver.
With a Standard TV Setup
Recommended Method:• Program the TV’s
remote control for your A/V receiver and enable the
Audio Lock feature. See page 65.
Program the TV’s remote control for your A/V •
receiver and set the TV remote control’s mode to
AUDIO
. Return the control mode to
TV
to control the
TV.
Use the remote control that came with the A/V •
receiver.
With HDMI Control (CEC-Enabled HDMI
A/V Receiver)
The TV’s remote control may control some functions of
the A/V receiver. See Appendix C, “HDMI Control of
CEC Devices,” page 73.
With NetCommand IR Control
Model L75-A91. Set up NetCommand control of the A/V
receiver’s volume functions in the Inputs > AVR menu.
The TV’s remote will then control A/V receiver volume.
See page 57.