Filter
Top Products
50
In Canada call 1(800) 450-6487 for assistance.
5
NetCommand IR Control
NetCommand IR home-theater control is avail-•
able on model L75-A91.
NetCommand IR home-theater control setup is •
optional.
You can perform NetCommand setup when the TV •
first recognizes a device during Auto Input Sensing
or at any convenient time afterward.
NetCommand operates by sending remote control •
signals from the TV to your other devices via the
IR (infrared) emitters, telling the devices to play,
record, change inputs, adjust volume, change
channels, or perform other functions. All this is
accomplished with the TV’s remote control left in
TV
mode.
You may wish to use NetCommand IR control to •
supplement control of CEC-enabled devices.
Important Note on NetCommand
Be sure to connect the IR emitter cable to the
TV and properly place the emitters so that
NetCommand can control your devices.
About NetCommand IR Control