Filter
Top Products
4. TV Menus 45
In the U.S. call 1(877) 675-2224 for assistance.
Inputs
Name
Cablebox, Cam(corder), CD, DVD
(DVD, DVD2, Blu-ray), DVR, Game
(Game, PS, Xbox, Wii), MP3 Player,
PC, Satellite, VCR, AVR
Delete (deactivated HDMI only)
On/Off (ANT only)
Lets you assign or • change names of inputs appearing in
the Activity menu.
Press - to move between inputs.
Press - to select a name.
You cannot change the name of the current input; you -
must first switch to another input. If you have only one
input, such as a cable box, make sure the Ant input is
On and switch to Antenna in the Activity menu before
renaming the single input.
Lets you turn the • Ant input On/Off (to display/hide it in the Activ-
ity menu).
Lets you delete unused HDMI inputs from the • Activity menu.
A CEC-enabled tuner can be named either •
Cable Box
or
Satellite
.
A CEC-enabled DVD player can be named •
DVD
,
DVD2
, or
Blu-ray.
L75-A91.• The VUDU
™
icon always remains visible.
General Notes
When you change an input name in the Name menu and then exit the Name menu:
The name is changed•
The icon in the • Activity menu is changed
Audio and video settings are changed to the defaults for the new device type.•
L75-A91.• All previous NetCommand IR “learning” for the input is erased.
Notes for HDMI devices
Disconnecting an HDMI device:• When you disconnect an HDMI device, the icon remains in the Activity menu until
you remove it. Select Delete in the Inputs > Name menu to remove an unwanted icon for an HDMI input.
If the • New Device Found screen does not display as expected when you connect an HDMI device, see “Reac-
tivating Auto Input Sensing for an HDMI Input,” page 13.
HDMI Control and CEC-Enabled Devices:• See Appendix C, “HDMI Control of CEC Devices,” page 73.
In case of CEC conflicts:• Turn off CEC signals in one of these ways:
Turn off the TV’s HDMI Control signals to the device. -
Turn off each device’s internal CEC capability. -
See Appendix C for the TV’s HDMI Control or, to turn on/off a specific device’s response to CEC signals, see
the device owner’s manual.
Learn
L75-A91. Sets up or changes NetCommand IR control of the current viewing device.
See “About NetCommand IR Control,” page 50.
AVR
L75-A91. Sets up or changes NetCommand IR control of an A/V receiver.
See “NetCommand IR Control of an A/V Receiver” on page 56.
HDMI Control On, Off Select On or Off to enable or disable the TV’s control of a CEC-enabled device. See
Appendix C for use of this feature.
Activity Lets you • customize the Activity menu choices for the current input.
Highlight the activity name and press •
ENTER
to make changes.
See • “How is the Activity Menu Generated?” on the next page.