Filter
Top Products
MODEL: WD-52327 / WD-62327
Page 19
SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS
Lenticular Screen and Fresnel Lens Installation
Note: Store the Lenticular Screen and Fresnel Lens in a cool dry place. High humidity may
deform the Lenticular Screen and Fresnel Lens.
1. Apply double coated tape (Part #LENS-TAPE) along the top rear edge of the Lenticular Screen, as shown
below. Refer to the table below for the tape length.
2. Sandwich the Fresnal Lens and Lenticular Screen together. The Lenticular Screen label must be towards
the front and the Fresnel Lens label towards the rear. (Figure 4)
3. Apply pressure at the top edge to bond the screens together.
4. Reverse the Screen Removal procedure and insert the screens in the Screen Fame Assembly.
Figure 4: Installing the Fresnel Lens & Lenticular Screen
*X INCHES - Refer to the Tape Length in the table below
MODEL SCREEN SIZE TAPE LENGTH
WD-52327 52 Inches 46.3 Inches
WD-62327 62 Inches 55.1 Inches