Mitsubishi Electronics mitsubishi Projection Television User Manual


 
MODEL: WD-52327 / WD-62327
Page 5
INTRODUCTION
This service manual provides service instructions for PTV models WD-52327 and WD-62327, using the VK26 chassis.
This service manual includes:
1. Assembly and disassembly instructions for the front and rear cabinet components.
2. Servicing of the Lenticular Screen and Fresnel Lens.
3. Servicing to PWB level. The Optical Engine and Lamp Ballast are considered replaceable components
.
4. Electrical and Mechanical adjustments.
5. Chip parts replacement procedures.
6. Simplified signal path block diagrams.
The parts list section of this service manual includes:
1. Cabinet and screen parts.
2. Electrical parts.
Block diagrams of the above listed models are included in this service manual for better understanding of the circuitry.
PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in television receivers have special safety related characteristics. These charac-
teristics are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by
using replacement components rated for higher voltage, wattage, etc.
Replacement parts which have special safety characteristics are identified in this service manual.
Electrical components having such features are identified by shading on the schematic diagram and by bold type in
the parts list of this service manual. Therefore, the replacement for any safety part should be identical in value
and characteristics.