Mitsubishi Electronics WS-55908 Projection Television User Manual


 
14
14
DTV 31.
∗∗
1080i
4:09 AM
Tuesday
Signal Strength
DTV 31.
∗∗
480p
4:09 AM
Tuesday
Signal Strength
or
Part II: Installation
How Connections Affect the PIP and POP
How Connections Affect the PIP and POP
To see a picture in the PIP or POP inset, you
may need to select an input source. If the
only input connected is ANT-A, then both
the main picture and the PIP/POP insert
will be from that input source. If other
video equipment is connected, you may be
able to view these input sources as the
PIP/POP insert. When connecting your new
Mitsubishi bigscreen, it is important to under-
stand which main picture and PIP/POP input
sources can and cannot be used together.
Table 1 shows which inputs can and cannot
be used together and the limitations they
may require. To see if 480i, DTV 480p,
1080i, Conponent-1 or Component-2 480p is
being displayed as the main picture, press
INFO on the TV remote control. The on-
screen display, gur e 1, wi ll list 480i , 480p or
1080i when those signals are being received.
See Operation of PIP and POP, pages
54-55, for operating instructions. An aster-
isk (*) displayed after the signal type indi-
cates that the signal being received is
a non-standard format. A non-standard
format signal may or may not display prop-
erly in a PIP/POP inset.
How Connections Affect the System 4 Home Theater IR Control
The Mitsubishi System 4 Home Theater IR
Control is a special feature that makes it
easier to use your TV with a digital surround
sound A/V receiver. Once your equipment
is properly connected and set up, your TV
and digital A/V receiver will change inputs
together, to match high resolution pictures
with the proper surround sound.
When you change inputs on your TV to
watch different video products, your TV will
send signals via your remote control and the
infrared emitters to your digital A/V receiver
to change inputs. You will automatically
hear the high quality digital surround sound
from digital products like your DTV receiver
and DVD player, and high quality analog
stereo or surround sound from non-digital
products like your VCR.
Additionally, all IR remote signals from your
Mitsubishi remote or other manufacturers
remote will be passed through your TV to
your A/V devices. Your A/V devices can
be hidden or behind cabinet doors and con-
trolled by pointing the remote at the TV.
POP/PIP
NIAM
A-TNA B-TNA 4-1STUPNI
TNENOPMOC
2-1STUPNI
VTD
A-TNA
*KO POP/PIPON KO KO KO
B-TNA
KO *KO KO KO KO
4-1STUPNI
KO KO **KO KO KO
TNENOPMOC
2-1STUPNI
KO KO KO **KO
POPKO
PIPON
VTD
KO KO KO KO **KO
STB
VGA
NO PIP
STB
OK OK OK OK OK
OK
OK
OK
OK
OK
OK**
Table 1. *No Side-by-Side with the same channel.
**No Side-by-Side with the same input.
PIP cannot display VGA.
Figure 1. On-screen display will show 480i, 480p, or
1080i when those signals are being received.