Mitsubishi Electronics WS-55908 Projection Television User Manual


 
15
15
Part II: Installation
How Connections Affect the System 4 Home Theater IR Control
Special Setups: A/V Equipment
VCR: Connect the cables to the TV as
directed on page 17, with one exception.
Connect the audio output connection to the
appropriate input on the back of the A/V
receiver (as shown in table 1).
DVD: Connect the cables as directed on
page 19 (using the COMPONENT-1 input),
with one exception. Connect the digital
audio output connection on the DVD player
to the appropriate digital input on the back
of the digital A/V receiver (as shown in table
1).
DTV: Connect the cables as directed on
pages 20-21, with one exception. Connect
the digital audio output connection on the
DTV receiver to the appropriate digital input
on the back of the digital A/V receiver (as
shown in table 1).
A/V Receiver: Connect as directed on
page 18, with two additions. Use a S-Video
cable in step 1 if you have a S-Video VCR.
The TV outputs should be connected to the
A/V receivers input marked TV.
•Auto Standby: ON (See your A/V receiver’s
Owner’s Guide for this procedure). For all TV
use, the sound will come from the A/V receiver.
Not available with all A/V receivers.
•Digital Input Assignment for DVD: Assign the
digital input you used for your DVD player to the
A/V receiver’s DVD input selector. This proce-
dure is explained in your A/V receiver’s Owner’s
Guide.
•Digital Assignment for DTV: Assign the digital
input you used for DTV to the A/V receiver’s DTV
input selector.
Infrared Emitter: Connect as shown on
page 22.
Special Setups: TV
Menu selection for A/V connections, page 32.
•TV Speakers: OFF
•Audio Output: Fixed
TV Inputs Appropriately Named: See Assign
Input Menu, page 33.
Remote Control, pages 26-27.
•Set the slide switch to the TV position and follow
the programming instructions using the A/V
receiver code appropriate for your A/V receiver,
page 27 ( gur e 5) .
(For System 4 Home Theater IR Control)
Brand Model
The products listed at the top of this column connect to the below listed
inputs on the back of the appropriate A/V receiver.
VCR
SAT/DBS/DTV
TV / Cable
DVD
Mitsubishi
Mitsubsihi
Denon
JVC
Kenwood
Onkyo
Pioneer
Sony
Yamaha
M-VR1000 / M-VR800
M-VR900 / M-VR700
AVR2800
RX-888V
VR-2080
TX-DS575
VSX-21
STR-DE825
RX-V2095
TV
TV
TV/DBS
TV
AV AUX
VIDEO 3
TV/SAT
TV/DBS
TV/DBS
VCR2
CABLE/DBS
VCR2
VIDEO 2
LD
VIDEO 2
VIDEO 2
VIDEO 2
VCR 2
VCR1
VCR
VCR1
VCR 1
VIDEO 1
VIDEO 1
VCR 1
VIDEO 1
VCR1
DVD
DVD
DVD/LD
DVD
DVD
DVD
DVD/LD
DVD/LD
DVD/LD
Table 1. A/V receiver back panel input table