Mitsubishi Electronics WS-55908 Projection Television User Manual


 
55
55
Part IV: Operation
Remote Control Functions: Operation of PIP and POP
Changing PIP/POP Inputs
Press PIP INPUT to cycle through available
inputs. To see which inputs can and cannot
be used together, see How Connections
Affect the PIP and POP - Table 1, page 14.
Changing PIP/POP Channels
Press PIP CH to scroll up and down through
memorized channels on Ant-A, and Ant-B.
Exchanging Program Images
Press ENTER/EXCH to exchange the main
picture and the PIP/POP picture.
Moving PIP Image
Press ADJUST , , , or to move the PIP
display anywhere on the main screen.
Automatic POP Switching
When automatic POP switching is active, the
TV will cycle through memorized channels
or strobe pictures from other A/V compo-
nents in the POP display. Press PAUSE to
activate/pause automatic POP switching.
Selecting POP “Live” Image
Press ADJUST , , , or to select a
different POP “live” image (automatic POP
switching must be paused).
Freeze the PIP and Side-By-Side
Picture
Press PAUSE to freeze the PIP and side-by-
side images. Press Pause again to return to
a “live” image.
PIP/POP Audio Signal
For PIP/POP audio connection illustration,
see Back Panel Functions -
3
, page 13.
Volume for the PIP AUDIO OUTPUT is con-
trolled by the ampli er or wirel ess head-
phones.
Operation of PIP and POP
PIP A 017
Ant-A 002 KCBS
480i Standard
Stereo SAP
TV-PG DLSV
SQV1
MAIN
PICTURE
Side-by-Side
MAIN
PICTURE
POP 1
POP 2
POP 3
MAIN
PICTURE
POP 1 POP 2 POP 3
POP 4 POP 5 POP 6
POP 7 POP 8 POP 9
PIP A 017
Ant-A 002 KCBS
480i Standard
Stereo SAP
TV-PG DLSV
SQV1
1
2
3
4
5