Filter
Top Products
10
External Speaker Connections
External speakers (not supplied) may be connected to the
plasma monitor to reproduce sound from VIDEO, DVD
or RGB signal sources.
External speakers may be connected directly to the
SPEAKERS terminals.
CAUTION: Unplug the plasma monitor and all connected
components before connecting external speakers. Use only
speakers with 6-ohm impedance and a power input rating
of 10 watts or more.
To connect external speakers directly to the plasma
monitor:
1. Strip the ends of the speaker wires.
2. Press down the tabs below the SPEAKERS terminals,
insert the speaker wire and release the tab to secure the
speaker wire connection:
[a] Connect the right speaker (located at right side
of the monitor when viewed from the front)
positive (+) wire to RIGHT +.
[b] Connect the right speaker negative (–) wire to
RIGHT –.
[c] Connect the left speaker negative (–) wire to LEFT–.
[d] Connect the left speaker positive (+) wire to LEFT+.