Filter
Top Products
2 - 2 2 - 2
MELSEC-Q
2 SYSTEM CONFIGURATION
2
(4) Compatibility with online module change
To make an online module change, use the module of function version C or later.
POINT
The products of function version C include the functions of the products of function
versions A and B.
(5) Software packages supported
Correspondence between systems which use A/D converter modules and
software packages are as shown below.
The GX Developer is necessary when using a A/D converter module.
Software Version
GX Developer
GX Configurator-AD
4
Single PLC system Version 7 or later
Q00J/Q00/Q01CPU
Multiple PLC system Version 8 or later
Version 1.10L or later
(cannot be used with the
SW0D5C-QADU-E 50F
or earlier versions).
Single PLC system Version 4 or later
SW0D5C-QADU-E 00A
or later
Q02/Q02H/Q06H/
Q12H/Q25HCPU
Multiple PLC system Version 6 or later
SW0D5C-QADU-E 20C
or later
Single PLC system
Q12PH/Q25PHCPU
Multiple PLC system
Version 7.10L or later
Version 1.13P or later
(cannot be used with the
SW0D5C-QADU-E 50F
or earlier versions).
If installed in a MELSECNET/H remote I/O
station
Version 6 or later
SW0D5C-QADU-E 50F
or later
4 Refer to Appendix 1.2 for the combinations of the A/D converter module functions and GX
Configurator-AD software versions.