Mitsubishi Electronics WD-Y57aa Projection Television User Manual


  Open as PDF
of 124
 
50 Chapter 4. TV Operation and Features
Choosing a Program Source
NOTE: Ifyouronlyviewingsourcesareconnectedtothe
ANT 1
and
ANT 2
antennajacks,youcanswitch
inputswithouttheInputSelectionmenu.Press
INPUT
toswitchbetween
ANT 1
and
ANT 2
.To
verifywhichisthecurrentsourcewhilewatching
TV,press
INFO
toseetheon-screenstatusdisplay.
Selecting from Multiple Sources: The Input
Selection Menu
TheInputSelectionmenuallowsyoutoselectaninputto
watchontheTV.Thecurrentinputappearsasagold-
coloredicon.
1. Press
INPUT
ontheTV’sremotecontroltodisplaythe
InputSelectionmenu(Figure2).
2. Toselectadifferentinput,press ontheTV’s
remotecontroltomovethehighlightthroughiconsin
theinputsection.
3. Press
ENTER
toswitchtothedeviceandclosethemenu.
More About the Input Selection Menu
• Toassignmeaningfullabelstotheicons,suchas
“VCR”or“DVD,”seethe“InputName”sectionof
chapter5,“TVMenuSettings.”
• Torearrangetheicons,seethe“IconOrder”sectionof
chapter5,“TVMenuSettings.”
• TousewithNetCommand-controlleddevices,includ-
ingIEEE1394/DTVLinkdevices,seeadditionalinfor-
mationinchapter6,“NetCommandOperations.”
Input Section
Audio Section
Figure 2. Input Selection menu. See chapter 6,
“NetCommand Functions,” for use of the Audio section.
withthemajorchannelandsub-channels(orbitstreams).
Analogchannelinformationisdisplayedassent.
Note: Iflimiteddataisshownornoprogramdataap-
pears,itisbecausethebroadcasterisnotsending
theinformation. This is not a defect of your TV.
Using ChannelView
Feature Instructions
Viewlistingswhileviewing
ANT 1
or
ANT 2.
Press
GUIDE.
Scanthroughmemorized
channelsonebyone.
Press
or .
Scanquicklythroughmemo-
rizedchannels.
Press
PAGE
/ .
Viewdetailedinformationfor
digitalchannels.
Press
or tohighlight
achannelandpress .
Returntoviewingbasiclist-
ingsinformation
Press
.
Figure 3. ChannelView screen, current programs. Use
to exchange displays for current and future programs.
Figure 4. ChannelView screen, future programs on the
selected channel (digital channels only)
IMPORTANT
To receive ChannelView updates: Set the
Energy Mode to Fast Power On and leave the
TV powered off for a while each day. If the TV
loses power, program listings will be lost until
the next update.
ChannelView™ Channel Listings
ChannelViewprovideslistings,assentbybroadcast-
ers,formemorizedchannelson
ANT 1
or
ANT 2.
ChannelViewisavailable
• foranantennainputnotassignedtotheTVGuide
OnScreensystem.
• WhentheTVGuideOnScreensystemisdisabled.
ChannelsaremarkedwitheitheraDfordigitalchannels
oranAforanalogchannels.Digitalchannelsareshown
 previous next