Filter
Top Products
10
Setting Time/Date
If you have set the time and date, information as to when an audio file is recorded is stored
automatically with that file. The time and date should be set to ease file management tasks. The
time and date setting is also needed to perform the alarm playback function. (☞ P.28)
The hour indicator will flash automatically when you load batteries before using the
recorder for the first time, or after the recorder hasn't been used for a long time. Proceed
from step 3.
1
Press and hold the FOLDER/
MENU button for 1 second or
longer.
The menu opens. (☞ P.41)
2
Press the FF/+ or
REW/– button until
“TIME&DATE ”
flashes on the
display.
3
Press the REC/SET button.
Time/Date screen appears. The hour
indicator flashes, indicating the start of
the Time/Date setup process.
• You can choose between 12 and 24
hour display by pressing the DISPLAY
button while setting the hour and minute.
Example: 5:45 P.M.
PM 5:45 ←→ 17:45
FF/+ or
REW/– button
(alters a choice)
REC/SET
button
(accepts a choice
and moves on to
the next item)
STOP
button
Setting Time/Date
Time/Date Screen
AM12:58
TIME&DATE
03
M
14
D
'02
Y
53,4
6
8
7
COMMENT
TIME&DATE
FolderName
FOLDER/
MENU
button
DISPLAY
button
(switching the
data displayed)
Changing the Time/Date