Filter
Top Products
44
Installing Software
Before you connect the USB cable to the recorder and your PC, you must first install the
software.
Be sure to confirm the following before installation:
• Exit all running applications.
• Eject the floppy disk if you are using one.
• If you are running Windows 2000 /XP (Professional only) on a network, you need to log on as an
administrator.
1
Insert Olympus DSS Player into the
CD-ROM drive.
The installation program will start
automatically. Once the program starts,
jump to step 4. If it does not, follow the
procedures in steps 2 and 3.
2
Click on the [Start] button and
select [Run].
3
Enter “D:/Setup.exe” in the [Open]
field and click on [OK].
This is assuming the CD-ROM is in drive
D.
4
The installation Language Selection
dialog box opens.
Click on the desired language to select it.
5
Click on [Next] when the DSS Player
opening screen appears.
6
Confirm your acceptance of the
terms of the Licensing Agreement.
You must accept the terms of the Licensing
Agreement to install DSS Player. If you
accept them, click on [Yes].
7
Register user information.
Register user information. Enter your
name, company name, and license ID
number (serial number).
The license ID number is printed on the license
ID card. Click on [Next]. A confirmation dialog
box opens, click on [Yes].
8
Select where to install DSS Player.
This lets you specify the folder in which to
install DSS Player. Click on [Browse] to find
the desired installation folder. To accept the
default folder, click on [Next].
Note
If the installation folder does not exist, a
confirmation dialog box opens to get your
permission to create a folder for this purpose.
Click on [Yes].
Windows
Installing Software