Filter
Top Products
33
Assigning Folder Names (FolderName)
Push ActionButton
To input the selected character and advance the input position.
Confirms folder name or file comment.
Selects character to be input: forward.
Skips forward quickly through characters.
Selects character to be input: back.
Skips back quickly through characters.
Returns to previous character.
To delete the flashing character.
Switches between character groups (type).
Quickly cycles through the character groups (types).
Selects character to be input: skips ahead by 5 characters.
Quickly skips ahead in increments of five characters.
Press once
Press and hold
Press once
Press and hold
Press once
Press and hold
----------
----------
Press once
Press and hold
Press once
Press and hold
REC/SET
FF/+
REW/–
NEW
ERASE
INDEX
DISPLAY
Recorder buttons that are used to input characters
Use the two following methods to quickly find characters.
1. When the INDEX button is pressed, the displayed character group (example: Uppercase,
lowercase, template, symbols) will change, and you can then press the FF/+ or REW/– buttons
to select characters.
2. Every time the DISPLAY button is pressed, it will skip ahead by five characters, so you can
quickly move closer to the character you want.
(Currently displayed character) = (Space) = DICT. = TO DO = A = F = K = P = U = Z = a = f =
k = p = u = z = 1 = 6 = , = ( = } = $ = ^ = (Space) = DICT. = TO DO...
If you press the DISPLAY button while a character other than one of the above appears, you will skip to the
closest forward character in the above cycle.
Pressing the DISPLAY button again will then cycle through every fifth character as shown above.
example:
If you press the DISPLAY button while “MEMO” is displayed, “TO DO” will appear.
If you press the DISPLAY button while “B” is displayed, “F” will appear.