Filter
Top Products
19
1
EN
Power supply
Power supply
Turning on/off the power
When the recorder is not being used,
turn the power off to reduce battery
consumption. Existing data, mode settings,
and clock settings are not lost when the
power is turned off.
Turning on the power
While the recorder is turned off,
slide the
POWER
/
HOLD
switch in the
direction of the arrow.
• The power turns on.
Power save mode
If the recorder is on but is not used for 10
minutes or longer (default), the display
shuts off and the recorder goes into
power save mode ( ☞ P.65).
• To exit power save mode, press any
button.
Turning off the power
Slide the
POWER
/
HOLD
switch in the
direction of the arrow, and hold it
for 0.5 seconds or longer.
• The power turns off.
• The resume function remembers the stop
position before the power is turned off.
• When disposing of the rechargeable
battery, always observe the local laws and
regulations. Contact your local recycling
center for proper disposal methods.
• If the Ni-MH rechargeable battery is not
fully discharged, protect against short-
circuiting (e.g. by taping the contacts)
before disposal.