2
30
EN
Recording
Recording
• [ Folder full ] will appear when recording
cannot be continued. Select another
folder or delete unnecessary files before
recording ( ☞ P.45).
• [ Memory full ] will appear when the
memory is full. Delete unnecessary files
before recording any further ( ☞ P.45).
• When a microSD card is inserted into the
recorder, be sure to confirm the recording
media as either [ Internal memory ]
or [ microSD card ] so that there is no
mistake ( ☞ P.65).
• If the REC ( s ) button is pressed when a
function other than the record function is
specified, [ Cannot record in this folder ]
is displayed. Select a folder from
[ Folder A ] through [ Folder E ] and start
recording again.
• Processing speed may be slower with
some types of microSD cards. Processing
performance may also be reduced due
to repeated writing and deleting. If that
happens, reformat the microSD card
( ☞ P.74).
• We recommend formatting the recording
media in the recorder before recording
( ☞ P.74).
For WS-803:
• You can record FM radio in [ FM Radio ]
mode ( ☞ P.47).
• This recorder is designed to be able to
record cleanly and evenly, even when
the volume of the source sound changes
significantly. However, even higher sound
quality recordings can be achieved by
adjusting the recording level manually
( ☞ P.56).
Recording will continue even if the
volume of a single file exceeds 2 GB in
linear PCM format recording.
• The data is saved every 2 GB in
separate files. It is treated as multiple
files during playback.
• If the recording exceeds 2 GB, the
number of files in the folder may
exceed 200. The 201st and later files
are not recognized by the recorder,
so check by connecting the recorder
to a PC.
4 It is possible to record data
exceeding 2GB:
For WS-803, WS-802: