Filter
Top Products
22
1
EN
Setting the time and date
Setting the time and date [Time & Date]
Changing the time and date
5 Press the `
OK
button.
• [ Time & Date ] appears on the display.
• “ Hour ” flashes on the display,
indicating the start of the Time and
Date setup process.
3 Press the `
OK
button to move
the cursor to the item you want
to set.
• [ Device Menu ] appears on the
display.
4 Press the
+
or
−
button to select
[
Time & Date
].
1 While the recorder is in stop
mode, press the
MENU
button.
• The menu will appear on the display
( ☞ P.53).
2 Press the
+
or
−
button to select
[
Device Menu
] tab.
• You can change the menu display by
moving the settings tab cursor.
While the recorder is in stop mode,
press and hold the STOP ( 4 ) button to
display [ Time & date ] and [ Remain ].
If the current time and date are not
correct, set them using the procedure
below.
The following steps are the same as
Step 1 through Step 3 of “ Setting the
time and date [ Time & Date ] ” ( ☞ P.21).
6 Press the
STOP
( 4 ) button to
close the menu screen.
+
−
button
9 0 button
`
OK
button
STOP
( 4 ) button
MENU
button