Olympus WS-802 DVR User Manual


 
2
35
EN
Recording
Recording
Note
For WS-803:
If you are unable to produce a clear
recording with this recorder even after
adjusting the recording level( P.56), this
could potentially be because the output
level for the connected devices is too
high or too low. When external devices
are connected, perform a test recording
and then adjust the output level for the
external devices.
For WS-802, WS-801:
The recording level cannot be adjusted
on this recorder. When an external device
is connected, perform a test recording
and then adjust the output level on the
external device.
4 Recording audio from another
device with this recorder:
Audio can be recorded when you have
connected the audio output terminal
(earphone jack) of another device and
the MIC
jack of the recorder using the
connecting cord KA333 (optional) for
dubbing.
Note
When you adjust the various sound
quality settings related to playback on
the recorder, the audio output signal sent
out from the EAR jack is also adjusted
( P.61, P.62).
4 Recording audio from this
recorder with another device:
Audio from this recorder can be recorded
to another device by connecting the
audio input terminal (microphone jack) of
the other device and the EAR jack of this
recorder using the connecting cord KA333
(optional).
To MIC jack
To audio output
terminal of other
device
To EAR jack
To audio input
terminal of other
device