Olympus WS-802 DVR User Manual


 
39
3
EN
Playback
Playback
About music files
In cases where the recorder is unable to play
back music files that have been transferred
to it, check to make sure that the sampling
rate and bit rate are in the range where
playback is possible. Combinations of
sampling rates and bit rates for music files
which the recorder can play back are given
below.
File format
Sampling
frequency
Bit rate
WAV format * 44.1 kHz 16 bit
MP3 format
MPEG1 Layer3:
32 kHz, 44.1 kHz,
48 kHz
MPEG2 Layer3:
16 kHz, 22.05 kHz,
24 kHz
From 8 kbps
up to 320
kbps
WMA format
8 kHz, 11 kHz,
16 kHz, 22 kHz,
32 kHz, 44.1 kHz,
48 kHz
From 5 kbps
up to 320
kbps
*
WS-803, WS-802 only.
Locating the beginning of a file
While the recorder is in stop mode
or playback mode, press the 9
button.
The recorder skips to the beginning of
the next file.
While the recorder is in playback
mode, press the 0 button.
The recorder skips to the beginning of
the current file.
While the recorder is in stop mode,
press the 0 button.
The recorder skips to the beginning of
the previous file. If the recorder is in
the middle of a file, it will return to the
beginning of the file.
While the recorder is in playback
mode, press the 0 button twice.
The recorder skips to the beginning of
the previous file.
Notes
When you skip to the beginning of the
file during playback, the recorder stops
at the position of the index mark or temp
mark. Index marks and temp marks are
skipped when you perform this operation
in stop mode ( P.42).
When [ Skip Space ] is set to a setting
other than [ File Skip ], the recorder skips
forward/reverse by the specified time
and then starts playback ( P.63).
Variable bit rate MP3 files (in which
conversion bit rates can vary) may not be
played back properly.
For WAV files, this recorder can only
play back those in the linear PCM format.
WAV files other than these cannot be
played back.
Even if the file format is compatible for
playback on this recorder, the recorder
does not support every encoder.